DA 60-820
44
Technical User Guide
4 Installation guide
4.1 Electrical connection
Installation, servicing and troubleshooting of all electrical equipment must be carried out by quali-
fied personnel in compliance with the applicable national and international standard EN 60204-1
and any other EU standards that are applicable in Europe.
The installation of a power supply isolator is required for each motor and power supply to facilitate
voltage-free work on the electrical equipment. The power supply isolator is not included.
4.1.1 Mains supply dimensioning regarding harmonic distortion
LPC motor controllers and frequency converters function like any other electronic power converter by converting
AC to DC. As this conversion produces a non-sinusoidal current, the mains supply for the controller is affected
by harmonic distortion.
The electrician or the user of the equipment must ensure, possibly through contact with the supply company,
that the equipment is connected to a properly sized mains supply.
4.1.2 Cabling in the exhaust unit
Drill a hole in the exhaust unit duct for the fan cable and
pull it along a support to the same side as the motor con-
troller.
4.1.3 Cabling into the LPC motor controller
In order to prevent water from running into the motor
controller via cables and screwed connections, the ca-
bling must be carried out so that it can stand water
around the cable in the gasket of the screwed connec-
tion.
