– As soon as the oil has been drained off (begins to drip), un‐
screw adapter for oil filling -VAS 6262A- or -VAS 6262- and
screw in the check screw -arrow- with new gasket.
Tightening torque: 45 Nm
– Switch off engine.
Thus, the gear oil and oil filter change is completed.
The oil is at the correct level.
– Install protection plate -A- at the bottom of the gearbox
-arrows-; if applicable.
– Install the noise insulation ⇒ Body Work; Rep. gr. 50 .
4.3
Changing oil in the Haldex coupling
Special tools and workshop equipment required
♦ Filling device for Haldex coupling - VAS 6291-
♦ Catch pan - VAS 6208-
♦ Oil for Haldex coupling ⇒ Electronic Catalogue of Original
Parts
Precondition
• Vehicle on level ground
Drain oil
– Place a catch pan under the Haldex coupling.
– Unscrew drain plug -arrow- and drain all oil from the Haldex
coupling.
– Screw in drain plug -arrow- and tighten to tightening torque
.
Replenish oil
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
92
4. Gearbox
