– Adjust the light with a screwdriver with socket extention or with
a socket wrench SW 6 by turning the screws -1- and -2-.
1 - Height adjustment
2 - Lateral adjustment
6.18
Adjusting the fog light
Inclination value:
The inclination is 2.2 %. The fog lights must be set to this value.
– Check whether the light/dark limit touches the adjusting line
and runs horizontally over the total width of the control screen.
Adjustment for RS vehicles
– Fit a screwdriver with socket extension or socket wrench SW
6 through the slot in the grid below the fog light.
Note
Pay attention to the correct sinking of the socket wrench in the
adjusting screw. It is guided into the adjusting screw with the cone
point of this screw.
– Align the fog light by turning the adjusting screw -arrows-.
Adjustment for Scout vehicles
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
6. Electrical System
143
