– Unclip cover -1- above fog light from the bumper.
– Insert screwdriver with socket extension or SW 6 Allen key
through the opening above the fog light.
Note
Pay attention to the correct sinking of the socket wrench in the
adjusting screw. It is guided into the adjusting screw with the cone
point of this screw.
– Align the fog light by turning -arrows- the adjusting screw -2-.
– Clip cover -1- above fog light into the bumper.
Setting for all other vehicles
– Fit a screwdriver with socket extention or socket wrench SW
6 through the slot in the grid above the fog light.
Note
Pay attention to the correct sinking of the socket wrench in the
adjusting screw. It is guided into the adjusting screw with the cone
point of this screw.
– Align the fog light by turning the adjusting screw -arrows-.
6.19
Replacing the own power supply of the
alarm system
– Replace the alarm of the alarm system ⇒ Electrical System;
Rep. gr. 96 .
6.20
Climatronic: Set temperature to 22 °C
Note
♦
The fastest way to obtain a comfortable climate (temperature)
in the vehicle, is by adjusting the temperature to 22°C.
♦
Hence if personal health conditions demand, only a regulation
in the adjustment is necessary.
Adjust the temperature to 22°C on the operating unit of the Cli‐
matronic
– Switch on ignition.
– Check if the displays (displays) indicate 22 °C.
– Set temperature as follows:
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
144
6. Electrical System
