– Press button of tyre inspection display for more than 2 sec‐
onds.
The warning light for the tyre inflation display in the dash panel
insert lights up as long as the button is pressed.
Performing the calibration is confirmed by an informative tone and
when the warning light in the dash panel insert goes out.
Calibration for vehicles with infotainment radio/navigation
Perform the calibration of the tyre inspection display according to
the vehicle specification.
The vehicles are equipped with different infotainment radio/navi‐
gation. For operation refer to the ⇒ operating instructions info‐
tainment radio/navigation .
– Switch on ignition.
– Select the following in the infotainment radio/navigation: “Se‐
lect vehicle systems” (Button
CAR
) and in addition the button
Tyres
.
– Further select the button
SET (with tyre symbol))
.
The calibration starts herewith.
– Then proceed by referring to the read-out on the display.
5.9
Transport security: Remove anti-lock
components from the shock absorbers
of the front axle
On vehicles with basic chassis and sport chassis, anti-lock com‐
ponents are attached to the shock absorbers of the front axle.
These vehicles are identified by a trailer label -arrow- on the in‐
terior mirror.
Note
These anti-lock components should protect the vehicle from back-
swing and through this also from damage when driving into the
transport vehicle or onto the train wagon.
WARNING
The anti-lock components must absolutely be removed before
the vehicle handover! The trailer label on the interior mirror
clearly informs you about this.
Proceed as follows:
Note
♦
It is not necessary to remove the wheel.
♦
Ensure that the surface of the springs is not damaged.
– Relieve helical springs by raising the vehicle onto the lift plat‐
form.
– Push the protective cover of the suspension strut upwards.
Octavia III 2013 ➤ , Octavia III 2014 ➤
Maintenance - Edition 12.2014
124