Skoda 2009 Yeti, Owner'S Manual

Page: 95 / 252

Buttons/control dial
Setting of the temperature for the left side, operation of the seat heating of
the left front seat
Automatic mode
AUTO
Switching off Climatronic
OFF
Setting the blower speed

Depending upon vehicle equipment: Button for direct switching on/off of aux-
iliary heating

⇒
page 95, or switching on/off of windscreen heater

⇒
page 53
Switching on/off of the temperature setting in dual mode
DUAL
Switching cooling on and off
AC
Setting of the temperature for the right side, operation of the seat heating of
the right front seat
Note
Below the top row of buttons is located the interior temperature sensor. Do not
glue or cover over the sensor, otherwise it could have an unfavourable effect on
the Climatronic.

Automatic mode
The automatic mode is used in order to maintain a constant tem-
perature and to demist the windows in the interior of the car.
Switching automatic mode on
– Set a temperature b18
℃
and +26
℃
.
–
Move the air outlet vents 3 and 4
⇒
fig. 88 , so that the air flow is directed
slightly upwards.
–
Press the button
AUTO
. In the right or left top corner a warning light lights up,
depending on which unit was last selected.
If the warning light in the top right corner of the button
AUTO
lights up, the Clima-
tronic operates in “HIGH” mode. The “HIGH” mode is the standard setting of the
Climatronic.
7
8
9
10
11
12
13
14
When pressing again the button
AUTO
, the Climatronic changes into the “LOW”
mode and the warning light in the top left corner lights up. The Climatronic uses
only in this mode the lower blower speed. However taking into account the noise
level, this is more comfortable, yet be aware that the effectiveness of the air con-
ditioning system is reduced particularly if the vehicle is fully occupied.
By pressing again the button
AUTO
, you change into the “HIGH” mode.
The automatic mode is switched off by pressing the button for the air distribution
or increasing or decreasing the blower speed. The temperature is nevertheless
regulated.

switching cooling on and off
switching cooling on and off
– Press the button
AC
⇒
fig. 92 . The warning light lights up in the button.
–
When you again press the switch
AC
, the cooling system is switched off. The
warning light in the button goes out. Only the function of the ventilation re-
mains active when no lower temperature than the outside temperature can be
reached.

Setting temperature
You can separate the interior temperature for the left and right side separately.
–
You can set the temperature for both sides after switching on the ignition
with the control dial
7
⇒
fig. 92 .
– If you wish to set the temperature for the right side, turn the control dial
14
.
The warning light in the button
DUAL
lights up, this indicates that differing
temperatures for the left and right side can be set.
If the warning light in the button
DUAL
lights up, the temperature for both sides
cannot be set with the control dial 7 . You can reinitiate this function by pressing
the button
DUAL
. The warning light in the button which indicates the possibility to
set differing temperatures for the left and right side, goes out.
You can set the interior temperature b18 °C and +26
℃
. The interior tem-
perature is regulated automatically within this range. If you chose a temperature
lower than +18 °C, a blue symbol lights up at the start of the numerical scale. If you
chose a temperature higher than +26 °C, a red symbol lights up at the end of the
£
93 Heating and air conditioning system
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical data