Skoda 2009 Yeti, Owner'S Manual

Page: 29 / 252

Do not continue driving if the warning light does not go off although the fluid is
at the correct level and also the fuse of the fan is in proper order. Contact a spe-
cialist garage to obtain assistance.
Please refer to the following guidelines
⇒
page 193, Cooling system.
The following text will be displayed in the information display:
Check coolant! Owner's manual!
WARNING
●
If you must stop for technical reasons, then park the vehicle at a safe dis-
tance from the traffic and switch off the engine and switch on the hazard
warning light system
⇒
page 50.
●
Take care when opening the coolant expansion bottle. If the engine is hot,
the cooling system is pressurized - risk of scalding! It is best to allow the en-
gine to cool down before removing the cap.
● Do not touch the coolant fan The coolant fan may switch on automatically
even if the ignition is off.

Traction control system (TCS)

The warning light

comes on for a few seconds when the ignition is switched on.
The warning light comes on when driving when a control cycle is activated.
The warning light lights up permanently if there is a fault in the TCS system.
The fact that the TCS system operates together with the ABS means that the TCS
warning light will also come on if the ABS system is not operating properly.
If the warning light

comes on immediately after starting the engine, the TCS
system can be switched off for technical reasons. In this case, the TCS system can
be switched on again by switching the ignition on and off. If the warning light
goes out, the TCS system is fully functional again.
Further information about the TCS
⇒
page 154, Traction control system (TCS).
Note
If the battery has been disconnected and reconnected, the warning light

comes
on after switching on the ignition. The warning light must go out after driving a
short distance.

Anti-spin regulation (ASR)

The TCS system is switched off by pressing the button
⇒
fig. 138 and the warning
light

lights up.

Electronic stability programme (ESP)

The warning light

comes on for a few seconds when the ignition is switched on.
When the ESP is just actively stabilizing the vehicle, the warning light

flashes in
the instrument cluster.
The warning light lights up permanently if there is a fault in the ESP system.
The fact that the ESP system operates together with the ABS means that the ESP
warning light will also come on if the ABS system is not operating properly.
If the warning light

comes on immediately after starting the engine, the ESP
system can be switched off for technical reasons. In this case, the ESP system can
be switched on again by switching the ignition on and off. If the warning light
goes out, the ESP system is fully functional again.
Further information on the ESP
⇒
page 153, Electronic stability programme (ESP).
Electronic Differential Lock (EDL)
The EDL is a part of the ESP. A fault in the EDL is indicated by the lighting up of
the ESP warning light in the instrument cluster. Have the vehicle inspected imme-
diately by your specialist garage. Further information on the EDL
⇒
page 154,
Electronic Differential Lock (EDL).
Note
If the battery has been disconnected and reconnected, the warning light

comes
on after switching on the ignition. The warning light must go out after driving a
short distance.

Selector lever lock

If the green warning light

lights up, operate the brake pedal. This is necessary,
in order to be able to move the selector lever out of the position P or N .
Further information about the selector lever lock
⇒
page 114.

27 Instruments and warning lights
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical data