Skoda 2009 Yeti, Owner'S Manual

Page: 90 / 252

Heating
Using the system
The heating system delivers air into the interior of the vehicle and
warms it as required.
Fig. 90 Heating: Control elements
Setting temperature
– Turn the control dial A
⇒
fig. 90 to the right in order to increase the tempera-
ture.
– Turn the control dial A to the left in order to increase the temperature.
Controlling blower
– Turn the blower switch B into one of the positions, 1 to 4, in order to switch
the blower on.
– Turn the blower switch B into position 0 in order to switch the blower off.
– If you wish to shut off the fresh air supply, use the button 1 - recirculated air
mode
⇒
in Recirculated air mode on page 89.
Control for air distribution
– You can adjust the direction of the inlet air flow
⇒
page 87 using air distribu-
tion regulator C .
Rear window heater
–
Press button
2
. Further information
⇒
page 53, Windscreen and rear window
heater.
Auxiliary heating (auxiliary heating)
–
Press the button
3
in order to directly switch on/off the auxiliary heating
(auxiliary heating and ventilation). Further information
⇒
page 95, Auxiliary
heating (auxiliary heating and ventilation).
All controls apart from the control dial
B
can be set to any desired intermediate
position.
The blower should always be on to prevent the windows from misting up.
Note
If the air distribution is positioned towards the windows, the total amount of air is
used to defrost the windows and thus no air will be fed to the footwell. This can
lead to restriction of the heating comfort.

Set heating
Recommended basic settings of heating controls for:
£
88 Heating and air conditioning system