136
1. Guides
2. Slider shoes
3. Tighten on this side
Tighten lock nuts (some models only) and retaining screws.
TYPICAL
1. Retighten (so equipped models)
2. Retighten to 48 N•m (35 lbf•ft)
WARNING
If lock nuts are not tightened properly, the adjusting screws could
loosen causing the track to become extremely loose and, under
some operating conditions, allow the idler wheels to climb over
the track lugs forcing the track against the tunnel causing the
track to “lock”. Properly tighten wheel retaining screws, other-
wise wheel may come off and cause track to “lock”.
A01F0BA
1
2
3
1
1
2
A05F0EB
mmo2005-002b_1.book Page 136 Monday, February 2, 2004 4:07 PM