135
Check that the track is well centered; equal distance on both sides
between edges of track guides and slider shoes.
1. Guides
2. Slider shoes
3. Equal distance
To adjust track alignment:
– Remove the tether cord cap.
– Loosen rear idler wheel retaining screws.
– Loosen the lock nuts (on so equipped models).
– Tighten the adjustment screw on side where the slider shoe is the
farthest from the track insert guides.
WARNING
Remove tether cord cap before performing any maintenance
or adjustment, unless otherwise specified. Vehicle must be
parked in a safe place, away from the trail.
A01F05A
1
2
3
mmo2005-002b_1.book Page 135 Monday, February 2, 2004 4:07 PM
