Ski-Doo Expedition LE, Operator'S Manual

Page: 66 / 163

CONTROLS, INSTRUMENTS AND EQUIPMENT
Place belt guard front openings over
tabs.
mmo2009-004-035_a
1. Belt guard
2. Tabs
Position the grommet over the retain-
ing rod.
mmo2009-003-011_a
1. Retaining rod
Position rear portion of the belt guard
over the retainer and secure it using
the retaining pin.
mmo2008-003-063_a
1. Retaining pin
28) Hood
WARNING
Never operate engine with hood
removed from vehicle.
Hood Removal
1. Remove upper side panels as ex-
plained below.
2. Unhook the rubber ties on both
sides.
mmo2009-004-038_a
1. Rubber tie
3. Slide hood towards front to free the
tabs from their slots.
Hood Installation
1. Engage the tabs located at front and
center of the hood into the bottom
pan slots.
mmo2009-004-039_a
TYPICAL
1. Tabs
2. Slots
2. Slide hood towards headlights until
it stops.
64
______________