Ski-Doo Expedition LE, Operator'S Manual

Page: 103 / 163

MAINTENANCE PROCEDURES
mmo2010-003-011_a
PLASTIC ADJUSTER HUB
1. Adjuster hub
2. Clamping bolt
5. Using the suspension adjustment
tool provided in the tool kit, turn the
ring 1/4 turn at a time then rotate the
driven pulley to properly set the belt
between the pulley sheaves.
mmo2011-003-011_a
ALUMINUM ADJUSTER HUB
1. Suspension adjustment tool
mmo2010-003-012_a
PLASTIC ADJUSTER HUB
1. Suspension adjustment tool
NOTE: The adjustment ring has left
hand treads.
Repeat step 5 until the external sur-
face of drive belt exceeds driven pulley
edge by 0 mm to 2 mm (0 in to .08 in).
mmr2009-081-001_a
PRELIMINARY SETTING
A. 0 mm to 2 mm (0 in to .08 in)
NOTE: Turning the ring counterclock-
wise lowers the belt in the pulley. Turn-
ing the ring clockwise raises the belt in
the pulley.
6. Tighten the clamping bolt to specifi-
cation.
CLAMPING BOLT TORQUE
5.5 N•m ± 0.5 N•m
(49 lbf• in ± 4 lbf• in )
mmo2011-003-010_b
1. Clamping bolt
7. Install belt guard, refer to
DRIVE
BELT GUARD INSTALLATION
.
8. Close side panel, refer to
SIDE
PANELS in CONTROLS, INSTRU-
MENTS AND EQUIPMENT
subsec-
tion.
______________
101