100
CAUTION:
Snowmobile engines have been calibrated with the
filter installed. Operating the snowmobile without it may cause
engine damage.
Headlight Beam Aiming
Turn knob to adjust beam height.
1. Knob
Bulb Replacement
Always check light operation after bulb replacement.
Headlight
CAUTION:
Never touch glass portion of an halogen bulb with
bare fingers, it shortens its operating life. If glass is touched,
clean it with isopropyl alcohol which will not leave a film on the
bulb.
If any headlight bulb is burnt, remove windshield, air filter then, air
deflector.
A30E08A
1
Mmo2002-003a.book Page 100 Friday, February 2, 2001 1:47 PM