SKF CLU5, Manual

Page: 60 / 116

Page 60
EN
Notes
CLU5 Pulse Lubrication System
Masthead
These assembly instructions with associated
operating instructions pursuant to EC Machin-
ery Directive 2006/42/EC are an integral part
of the described product and must be kept for
future use.
These assembly instructions with associated
operating instructions have been prepared in
accordance with the established standards and
rules for technical documentation, VDI 4500
and EN 292.
© SKF Lubrication Systems Germany GmbH
This documentation is protected by copyright.
SKF Lubrication Systems Germany GmbH
reserves all rights, including those to the
photomechanical reproduction, duplication,
and distribution by means of special proce-
dures (e.g., data processing, data media, and
data networks) of this documentation in whole
or in part.
Subject to changes in contents and technical
information.
Service
If you have technical questions, please contact
the following ofices:
SKF Lubrication Systems Germany GmbH
Berlin Plant
Motzener Strasse 35/37
12277 Berlin
Germany
Tel. +49 (0)30 72002-0
Fax +49 (0)30 72002-111
www.skf.com/lubrication
Hockenheim Plant
2. Industriestrasse 4
68766 Hockenheim
Germany
Tel. +49 (0)62 05 27-0
Fax +49 (0)62 05 27-101
www.skf.com/lubrication
Table of contents
Information concerning EC Declaration of
Conformity and EC Declaration of Incorporation 62
Explanation of safety and informational symbols
and safety signal words 63
Assembly instructions
1. Safety instructions 65
2. Overview 68
3. Assembly 69
3.1 General notes 69
3.2 Assembly of timed lubricator PDYS 69
3.2.1 Hydraulic connections 70
3.2.2 Characteristics of timed lubricator PDYS 71
3.2.3 Pressure sensor on timed lubricator
72
3.2.4 4/2 directional solenoid valve 73
3.3 Assembly of oil supply unit with ilter unit 74
3.3.1 Hydraulic connections 74
3.3.2 Characteristics of oil supply unit 77
3.3.3 Characteristics of ilter unit 78
3.3.4 Electrical contamination indicator 78
3.3.5 System pressure sensor (PT) 79