Page 103
EN
Fig. 17
Replacing a pressure sensor
The pressure sensor are maintenance-free.
If the pressure sensor (PT) are not working
properly, this will be shown immediately by
the lack of a pressure indication.
Replacement pressure sensor
In order to relieve pressure when replac-
ing pressure sensor PT, the oil supply unit
must be shut down temporarily.
Procedure for pressure sensor PT:
Shut down the oil supply unit.
Remove the plug (
2
) on the pressure
sensor being replaced (
1
).
Screw out the faulty pressure sensor (
1
),
screw in the new pressure sensor (
1
).
Maximum tightening torque 25 Nm
6.5.5 Replacing a pressure sensor PT
PT
Place plug (
2
) on the pressure sensor (
1
).
Turn on
the oil supply unit.
6. Maintenance
PT
