EN
6. Installation
- 52 -
951-181-014-EN
Version 16
Correct connection of the protective conductor in the terminal box Fig. 7
6.5 Protective conductor connection of
SEW motor
To connect the protective conductor in the
terminal box (8) of the motor use a cable
lug. The cable lug and the motor housing
must be separated by means of a washer
(9).
Connect the cables in such
way that no mechanical
forces are transferred to the
product.
6.6 Electrical connection of the low-
level indication
Electrical connection of the low-level
indication follows the respective technical
data of the sensor in these instructions. In
addition, indications regarding the switch
amplifier and, if applicable, those of other
devices to be connected by the operator
have to be observed.
9
8
Summary of Contents for 655-41261-1
