SKF 655-41261-1, Operating Instructions Manual

Page: 79 / 94

13
EN
13. Shutdown and disposal
- 79 -
951-181-014-EN
Version 16
13. Shutdown and disposal
13.1 Temporary shutdown
Temporarily shut the system down by:
○
Switching off the superior machine
○
Disconnecting the product from the
power supply
13.2 Final shutdown and disassembly
The final shutdown and disassembly of the
product must be professionally planned and
carried out by the operator in compliance
with all regulations to be observed.
13.3 Disposal
Countries within the European Union
Disposal should be avoided or minimized
wherever possible. Disposal of products
contaminated with lubricant must be effect-
ed via a licensed waste disposal contractor
in accordance with environmental require-
ments and waste disposal regulations as
well as local authority requirements .
The specific classification of the
waste is in the waste producer's
responsibility, as the European
Waste Catalogue provides differ-
ent waste disposal codes for the
same type of waste but of differ-
ent origin.
Dispose of or recycle electrical
components following WEEE
directive 2012/19/EU.
Parts made of plastic or metal
can be disposed of with the
commercial waste.
Countries outside the European Union
The disposal has to be done according to the
valid national regulations and laws of the
country where the product is used.