4
A. Connect the charger to the 12V DC power supply.
Connect the charger’s red alligator clip to the positive (+) terminal on the power source and
the black alligator clip to the negative (-) terminal. The charger will display “Input voltage”
error message if the input is below 11V or above 15V. If this happens, please recheck the
input power supply to make sure adequate power is present.
- OR -
B. Connect the AC plug to a regular AC100~240V wall outlet.
Note : If AC power is being used for input power, do NOT try to connect the 12V DC power as
well !
Operating Instructions
3.CONTROLS
- Input power -
DC 12V
Input alligator clips.
Balancing port
button
+ Output
- Output
Blue backlit display
AC INPUT
Balancing cable
Balancing adapter board
Summary of Contents for SwaLLow
Page 12: ......
