Input voltage is 11~15V DC, or AC 100V ~ 240V / 50 ~ 60Hz
Capable of charging and discharging 1 - 14 NiCd or NiMH cells, 1 - 6 Lithium-Ion,
Lithium-Polymer or LiFePO4 cells or 2 ~ 12V lead-acid batteries
Adjustable charge current (0.1A - 6.0A)
Adjustable discharge current (0.1A - 1.0A). Auto limited to maintain 5W maximum.
"Zero Delta V" peak detection for NiCd and NiMH batteries
"Constant Current / Constant Voltage" charge method for Lithium-Ion/Po, LiFe batteries
and Pb batteries.
Pack Cycling( Charge to Discharge / Discharge to Charge )
2 -line, 16 character, blue backlit, LCD makes the screen extremely clear and legible.
Built-in an intelligent balancing circuit is designed to individually balance each cell on
the connected lithium battery pack within the tolerance of 5mV during charge or
discharge.
Voltage monitoring feature is to show each actual cell voltage on the screen during
balancing.
Various warning messages for improper input voltage, wrong connections, unsuitable
battery condition and reverse polarity on output.
Packaged in a rugged, extruded aluminum case
*
*
*
*
*
*
*
*
*
*
*
*
2
Operating Instructions
Special Features
Do NOT attempt to charge incompatible types of rechargeable batteries. This charger is
designed to only charge and discharge Nickel-Cadmium, Nickel-Metal Hydride,
Lithium-Ion ,Lithium-Polymer, LiFePO4, and Lead-Acid batteries.
Make sure to place the charger on a firm level surface for charging.
Do not attempt to charge batteries at excessive fast charge currents. Check with your
battery manufacturer for the maximum charge rate applicable to your battery.
Do not use automotive type battery chargers to power the charger.
Do not leave the charger unattended while charging. Disconnect the battery and remove
input power from charger immediately if the charger becomes hot. Allow the charger or
battery to cool down before reconnecting.
Do not allow water, moisture or foreign objects into the charger.
Do not place the battery or charger on or near a flammable object while in use. Keep
away from carpets, cluttered workbenches, etc.
Do not cover the air intake holes on the charger as this could cause the charger to over-
heat.
Connect the input leads to a 12V power supply first, then connect the battery.
Do not disassemble the charger.
This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use the
appliance safely.
Young children should be supervised to ensure that they do not play with the appliance.
Do not attempt to charge non-rechargeable batteries.
The battery must be placed in a well ventilated area
when charging Lead Acid batteries.
When charging a battery in a vehicle, th
e battery terminal not connected to the chassi
s
has to be connected first. The other connection is to be made to the chassis, remote from
the battery and fuel line. The
battery charger is then to be connected to the supply mains;
After charging disconnect the battery charger from the supply mains. Then remove the
chassis connection and then the battery connection.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Safety precautions
!
Summary of Contents for SwaLLow
Page 12: ......
