SJ SwaLLow, Operating Instructions Manual

Page: 6 / 12

NiCd CYCLE C->D 5
C=3.0A D=0.50A
NiCd DISCHARGE
D=0.50A 4.8 V
6
Operating Instructions
NiCd CHARGE
C=3.0A
Setting charge current
Adjust and find the desired charge current which ranges from 0.1A to 6.0A with the
INC & DEC buttons. Press the ENTER button to confirm the setting.
NiCd DISCHARGE
D=0.50A 4.8 V
Setting discharge current
Adjust and find the desired discharge current which ranges from 0.1A to 1A with the
INC & DEC buttons. Press the ENTER button to confirm the setting.
Setting discharge cutoff voltage
This is the voltage that the charger should stop discharging the battery.
Adjust and find total discharge cutoff voltages to be discharged from 0.1V to 16.8V
with the INC & DEC buttons. Press the ENTER button to confirm the setting.
Setting cycle
This is to set cycling with two options (Charge to Discharge / Discharge to Charge).
Set cycling with the INC & DEC buttons and press the ENTER button to confirm the
setting.
NiCd delta-peak-
'volt = 0mV/cell
Setting Delta Peak Sensitivity.
This is to set the Delta Peak Sensitivity from 5mV to 25mV per cell with INC & DEC
buttons and press the ENTER button to confirm the setting.
NiCd CYCLE D->C 5
C=3.0A D=0.50A
NiCd CYCLE D->C 5
C=3.0A D=0.50A
NiCd CYCLE D->C 5
C=3.0A D=0.50A
4. NiCd MODE
NiCd CHARGE
C=3.0A NiCd DISCHARGE
D=0.50A 4.8 V NiCd CYCLE D->C 5
C=3.0A D=0.50A NiCd delta-peak-
'volt = 0mV/cell
INC
DEC
INC DEC INC DEC INC DEC INC DEC
ENTER ENTER
ENTER ENTER
ENTER
ENTER
START
ENTER ENTER
INC
DEC
INC
DEC
INC
DEC
NiCd CHARGE
C=3.0A NiCd DISCHARGE
D=0.50A 4.8 V NiCd CYCLE D->C 5
C=3.0A D=0.50A NiCd delta-peak-
'volt = 0mV/cell
START
START
INC DEC INC DEC
BATTERY CHECK
WAIT PLEASE. . . . NiCd DISCHARGE
D=0.50A 4.8 V NiCd CYCLE C->D 5
C=3.0A D=0.50A
INC DEC
CHG 0:00 00000
NC + 3.00A 1.200V
BATTERY CHECK
WAIT PLEASE. . . .
INC DEC
DCH 0:00 00000
NC - 0.50A 5.200V
BATTERY CHECK
WAIT PLEASE. . . .
D->C 0:00 00000
NC - 0.50A 5.200V
BA
TT
TYPE