SJ SwaLLow, Operating Instructions Manual

Page: 7 / 12

7
Operating Instructions
NiMH CYCLE D->C 5
C=3.0A D=0.50A
NiMH CYCLE D->C 5
C=3.0A D=0.50A
NiMH CYCLE D->C 5
C=3.0A D=0.50A
5. NiMH MODE
NiMH CHARGE
C=3.0A NiMH DISCHARGE
D=0.50A 4.8 V NiMH CYCLE D->C 5
C=3.0A D=0.50A NiMH delta-peak-
'volt = 0mV/cell
INC
DEC
INC DEC INC DEC INC DEC INC DEC
ENTER ENTER
ENTER SETUP
SETUP
SETUP
START
SETUP ENTER
INC
DEC
INC
DEC
INC
DEC
NiMH CHARGE
C=3.0A NiMH DISCHARGE
D=0.50A 4.8 V NiMH CYCLE D->C 5
C=3.0A D=0.50A NiMH delta-peak-
'volt = 0mV/cell
START
START
INC DEC INC DEC
BATTERY CHECK
WAIT PLEASE. . . . NiMH DISCHARGE
D=0.50A 4.8 V NiMH CYCLE C->D 5
C=3.0A D=0.50A
INC DEC
CHG 0:00 00000
NH + 3.00A 1.200V
BATTERY CHECK
WAIT PLEASE. . . .
INC DEC
DCH 0:00 00000
NH - 0.50A 5.200V
BATTERY CHECK
WAIT PLEASE. . . .
D->C 0:00 00000
NH - 0.50A 5.200V
BA
TT
TYPE
NiMH CYCLE C->D 5
C=3.0A D=0.50A
NiMH DISCHARGE
D=0.50A 4.8 V
NiMH CHARGE
C=3.0A
Setting charge current
Adjust and find the desired charge current which ranges from 0.1A to 6.0A with the
INC & DEC buttons. Press the ENTER button to confirm the setting.
NiMH DISCHARGE
D=0.50A 4.8 V
Setting discharge current
Adjust and find the desired discharge current which ranges from 0.1A to 1A with the
INC & DEC buttons. Press the ENTER button to confirm the setting.
Setting discharge cutoff voltage
This is the voltage that the charger should stop discharging the battery.
Adjust and find total discharge cutoff voltages to be discharged from 0.1V to 16.8V
with the INC & DEC buttons. Press the ENTER button to confirm the setting.
Setting cycle
This is to set cycling with two options ( Charge to Discharge / Discharge to Charge).
Set cycling with the INC & DEC buttons, and press the ENTER button to confirm the
setting.
NiMH delta-peak-
'volt = 0mV/cell
Setting Delta Peak Sensitivity.
This is to set the Delta Peak Sensitivity from 3mV to 25mV per cell with INC & DEC
buttons and press the ENTER button to confirm the setting.