SJ SwaLLow, Operating Instructions Manual

Page: 10 / 12

Pb DISCHARGE
D=0.50A 12Vpack
Pb CHARGE
C=3.0A 12Vpack
Pb CHARGE
C=3.0A 12Vpack
Pb CHARGE
C=3.0A 12Vpack
Pb CHARGE
C=3.0A 12Vpack Pb DISCHARGE
D=0.50A 12Vpack
10
Operating Instructions
7. Pb MODE
Pb CHARGE
C=3.0A 12Vpack Pb DISCHARGE
D=0.50A 12Vpack
Pb DISCHARGE
D=0.50A 12Vpack
BA
TT
TYPE
INC DEC INC DEC
INC DEC INC DEC
START
ENTER
ENTER ENTER
ENTER
START
BATTERY CHECK
WAIT PLEASE. . . . BATTERY CHECK
WAIT PLEASE. . . .
CHG 0:00 00000
Pb + 3.00A 12.800V CHG 0:00 00000
Pb - 0.50A 11.200V
DEC
INC
to NiCd charge
Setting charge current
Adjust and find the desired charge current which ranges from 0.1A to 6.0A with the INC & DEC
buttons. Press the ENTER button to confirm the setting
Setting battery voltages for Li-Ion battery pack
Select the proper total battery voltages to be charged or discharged with the INC & DEC buttons
– 2V, 4V, 6V, 8V, 10V, and 12V [Vpack]
Setting discharge current
Adjust and find the desired discharge current from 0.10A to 1.00A (0.01A per step) with the INC
& DEC buttons. Press the ENTER button to confirm the setting.
8. Displays during charge, discharge, and cycle
If the Enter button is pressed, the charge or discharge can be terminated.
CHG 030:25 00000
NC + 3.00A 10 .75V DCH 030:25 00000
NC - 3.00A 10 .75V D->C 0:00 00000
NH + 3.0 1.200
“BLC” should be shown if the balancer cable is connected
to the balancing port of the charger.
CHG: charge
DCH: discharge
C→D: cycle
D→C: cycle
NC: NiCd
NM: NiMH
LI: LiIo , LP: LiPo , LF: LiFe
Pb: Pb