12
3.2 Configuration/Initialization
First initialisation
The terminal is provided to you in a non-config-
ured state and must be configured to be operable.
Please read the configuration sheet delivered
with the device. It contains all specific data for
your terminal. The terminal configuration proce-
dure is described in detail in the configuration
sheet. Initialisation requires several minutes.
Wait until the terminal displays the welcome
message.
Subsequent initialisation
Should it be necessary to re-initialise a device
for any reason, proceed as outlined on page 13.
Key
The following symbols are used in the descrip-
tions in this document.
..............
Function selection by choosing the corresponding number or using the
cursor and the <OK> button.
Insert card.
Depending on the card type, it must be inserted in the chip card reader,
held up to the contactless reader or pulled through the magnetic swipe
reader.
Remove card.
Sales slip printout.
Request the customer’s signature.
Processing and/or communication.
Manual entry of the card data.
Press function button.
Summary of Contents for xenta COMPACT
Page 1: ...User guide xenta COMPACT...
