sitrex TR/11, Assembly, Use And Maintenance

Page: 28 / 40

27
Step 18
Step 18
Insert bushings 2 in drawbar 1.
Connect drawbar 1 to bracket A and fasten with pin 3, washer 4 and nut 5.
Attach the package stand 6 at point C and fasten with pin 7 and R-clip 8.
Attach the tractor hitch 9 at point B and fasten in the upper hole with bolt 10, washer 11
and nut 12, in the lower hole with bolt 13, flat washers 14, split washer 15 and nut 16.
Attach hose bracket 17 to point D and fasten it with washer 18 and bolt 19.
In this step use the following parts:
Position 2: 2 bushings ø35-39x30
Position 3: 1 pin ø35x400
Position 4: 1 washer ø23-50x4
Position 5: 1 nut M22
Position 7: 1 pin ø15
Position 8: 1 R-clip ø3
Position 10: 1 bolt M20x140
Position 11: 1 washer ø21
Position 12: 1 nut M20
Position 13: 1 bolt M12x140
Position 14: 2 washers ø12-36x2.5
Position 15: 1 split washer ø13
Position 16: 1 nut M12
Position 18: 1 washer ø12-40x4
Position 19: 1 bolt M12x25