sitrex BR 2030/6, Assembly Instructions Manual

Page: 45 / 62

41
3.6.4
MOTOR HOSES
SECURE THE 6500 mm (256 in) HYDRAULIC HOSE FROM
THE PANEL PORT LABELED “A1”
TO THE “A1” PORT ON THE RH MOTOR.
THE HOSE ATTACHED TO PO
RT “B1” ON THE PANEL CONNECTS TO THE LH MOTOR PORT
LABELED “B1”.
SECURE THE 6400 mm (252 in) HYDRAULIC HOSE FROM THE UNLABELED RIGHT-HAND
FITTING ABOVE THE PANEL TO THE UNLABELED PORT ON THE RH MOTOR.
THE LH MOTOR PORT THAT IS UNLABELED IS CONNECTED TO THE UNLABELED LH SIDE
PORT ABOVE THE PANEL.
ROUTE THE MOTOR HYDRAULIC
HOSES UNDER THE REAR TURN-
BUCKLE AND UP ALONG THE
FRAME RAIL TO THE HYDRAULIC
PANEL.
1040 mm (41 in)
1290 mm (50-13/16 in)
INSTALL THE
SLEEVES LH AND
RH
AND SECURE
EACH ONE WITH
TWO CABLE TIES.