2.
Select the desired
Channel
number in the left (
No.
) column.
3.
There are 2 radio buttons, for
LAN
or
Internet
. The default is
LAN
. See the following
section for details of the
Internet
option.
•
The
LAN
panel, on the left, displays all Network Camera found on your LAN. This list
can be updated by clicking the
Refresh
button.
•
The
Camera Data
panel, on the right, displays the data for the selected camera.
4.
To associate a camera with the current
Channel
:
•
Select a camera in the list on the left.
•
Enter the value of
Local ID
.
•
Check that the
Camera Data
shown on the right is correct. See below for details.
•
Click the
Add
button. The camera will now appear in the
Channel List
.
Local ID
This is the name you gave to this camera. This field must be entered.
Camera Name
This is the default name for the Network Camera, and cannot be
changed.
IP Address
The current IP address of the Network Camera.
Port Number
This will normally display "80". Only change this if requested to do so
by the Network Camera Administrator.
Login
The camera Administrator can require that users provide a username
and password before being allowed to view the live video.
•
If the Administrator has not enabled this option, the
Login
fields
can be left blank.
•
Otherwise, you must enter the username and password allocated
to your by Administrator.
Setup Camera
Pages
Click this button to connect the Web-based interface of the Camera
Enable
Trigger Event
Check this if you want the Camera to have the feature enabled.