5. Web-based Management
Introduction
The Network Camera can be configured using your Web Browser. The Network Camera
must have an IP address which is compatible with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as
described in
Chapter 2 - Basic Setup
.
Connecting to Network Camera
•
If using only your Web Browser, use the following procedure to establish a connection
from your PC to the Network Camera:
•
Once connected, you can add the Network Camera to your Browser's
Favorites
or
Bookmarks
.
Connecting using your Web Browser
1. Use the Windows utility to get the IP address of the Network Camera.
2. Start your WEB browser.
3.
In the
Address
box, enter "HTTP://" and the IP Address of the Network Camera
(192.168.0.230 by default).
4. You will then be prompted for a username and password.
•
If using the default values, enter
admin
as username, and
admin
as password.
•
Otherwise, enter the
Administrator ID
and
Administrator Password
set on the
Maintenance
screen.
Welcome Screen
When you connect, the following screen will be displayed.
