This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
CRAFT HEAT PRESS Manual for use and maintenance
6
2. Initial Setup
General Guidelines:
• To avoid burns, do not touch the heated platen during use.
• Keep hands clear of the upper platen of the press during lock down as the
pressure may cause injury.
• Press should be placed on a sturdy, suitable stand at least 92 cm L x 61 cm W x
74 cm H.
• Work area must be kept clean, tidy and free of obstructions.
Carefully follow the step-by-step instructions for best results.
1. Failure to comply with the instructions relative to installation, use and
maintenance as described in this manual.
2. System and environmental conditions that are not conducive for the
machine to perform.
3. Unauthorized alterations to the machine.
4. Operation by unqualified and untrained personnel.
CAUTION! Failure to follow these instructions will cause:
1. Erratic controller functions.
2. Inaccurate displays and slow heat-up.
3. The circuit breaker to disengage.
Summary of Contents for CP912-240
Page 12: ... SISER S r l 2020 Notes ...
