This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
CRAFT HEAT PRESS Manual for use and maintenance
7
3. Adjusting Temperature, Time and Pressure
Recommended settings vary based on the garment material and type of
transfer product used.
Please consult the instructions or specifications that came with your transfer
product for appropriate temperature and time settings
With the press ON and the Lift Handle in the UP position, press the MODE
button to cycle through setup modes:
Various transfer products will recommend using either “light”, “medium” or
“heavy” pressure. Some trial and error may be required to determine the best
pressure setting, but once selected, your craft press will reliably reproduce the
same pressure, print after print.
• Displays current
temperature (C°)
• Ready to Print
• Displays print temperature
• Increase using (+) button
• Decrease using (-) button
• Displays print time (sec)
• Increase using (+) button
• Decrease using (-) button
Summary of Contents for CP912-240
Page 12: ... SISER S r l 2020 Notes ...