This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
CRAFT HEAT PRESS Manual for use and maintenance
4
Safety Precautions
When using your heat press, basic precautions should always be followed,
including the following:
1. Read all instructions.
2. Use heat press only for its intended use.
3. To reduce the risk of electric shock, do not immerse the heat press in water
or other liquids.
4. Never pull cord to disconnect from outlet, instead, grasp plug and pull to
disconnect.
5. Do not allow cord to touch hot surfaces, allow heat press to cool completely
before storing.
6. Do not operate heat press with a damaged cord or if the equipment has
been dropped or damaged. To reduce the risk of electric shock, do not
disassemble or attempt to repair the heat press. Take it to a qualified service
person for examination and repair. Incorrect assembly or repair could
increase the risk of fire, electric shock, or injury to persons when equipment
is used.
7. This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
8. Close supervision is necessary for any heat press being used by or near
children. Do not leave equipment unattended while connected.
9. Burns can occur when touching hot metal parts.
10. To reduce the likelihood of circuit overload, do not operate other high
voltage equipment on the same circuit.
11. If an extension cord is necessary, then a 10 amperage rated cord should be
used. Cords rated for less amperage may overheat. Care should be taken to
arrange the cord so that it cannot be pulled or tripped over.
12. Never take it upon yourself to remove the press instrument box: if problems
arise, contact our specialist person directly during normal working hours on
+39 0444 287960. Opening the instrument box of your own accord causes
all rights to warranty to become void.
Summary of Contents for CP912-240
Page 12: ... SISER S r l 2020 Notes ...