Sirus Live M416, Manual

Page: 25 / 45

25 / 45
Positions the group signals between L and R in the stereo mix when the GRP TO LR switch is
pressed. Using pan you can create mono or stereo groups positioned as you require in the main mix.
For stereo grouping, set the odd group pan fully to the left, and the even group pan fully to the right.
The centre position (mono image) is for quick resetting. Note that the group mix always feeds these
subgroup controls regardless of FOH or monitor mode selected.
10.1.5. Meter
A 4 LED bar meter displays the post-fade group signal (FOH mode), or aux signal (monitor mode,
REV pressed)
10.1.6. MUTE
When pressed the group (aux) signal is turned off. This affects the feed to the output XLR, LR and
matrix. The red indicator lights when the channel is muted.
10.1.7. GROUP AFL
Press AFL to listen to the post-fade, pre-mute group mix in the headphones and local monitor without
affecting the main outputs. Note that this becomes the aux mix in monitor mode. The console monitor
meters are interrupted with the group (aux) signal. The yellow indicator lights to show that AFL has
been selected on that master.
10.1.8. Fader
A 100mm a smooth travel fader controls the group mix output level. Note that it becomes the aux mix
master in monitor mode (REV pressed). The fader pr10dB maximum boost above its normal
unity gain 0dB position.