Sirus Live M416, Manual

Page: 23 / 45

23 / 45
9.2.4. EQ
Similar to the mono channel, but the twp peak/dip mid bands are fixed at 250Hz and 2.5 kHz centre
frequencies.
9.2.5. AUX Sends
These work as described for the mono channel, but the L and R sides of the stereo signal sum
together to feed each aux in mono.
9.2.6. BAL
It balances the level of the L signal against the R signal to compensate differences in the source, or to
position the signal within the stereo image.
9.2.7. Mute
When pressed, all the channel pre and post-fade signals are turned off except the mic out and any
stereo routed direct to LR.
9.2.8. PFL
Press PFL to display summed L+R pre-fade channel signal on the monitor meters and listen to it in the
headphones and local monitor without affecting the main outputs.
9.2.9. Meter
The same as the mono channel, but the left and right signals are summed together.
9.2.10. Routing
The same as the mono channel, but routes the left signal to L and odd groups, right signal to R and
even groups.
9.2.11. Fader
The stereo fader pr10dB maximum boost above is normal unity gain 0dB position.