Siruba ASC-TBH100A, Manual, Page: 50 / 65

18
According to the front needle distance compensation and needle
distance test, adjust the system needle distance and its needle distance
compensation, so that the speed of the delivery wheel matching the
head needle distance.
5.
Set the number of bone bits.
6. Set the opening seam point.
7. Set End point.
8.
Inverted bone switch
In the main control interface click the
parameters box ,
enter the number of bone bits set page. The
right keyboard input the actual number of
bone bits, press OK to save exit, press
Cancel do not save exit
In the main control interface Click the end
of the box , enter
the end stitches count Settings page. The
right keyboard to enter the actual number
of stitches needed, press OK
In the main control interface click the
parameter box , enter
the starting stitches number Settings page.
The right keyboard to enter the actual
number of pins needed, press OK
B C
A
D E
A. Change a/all control solenoid
valve status of inverted bone
B. Set open time of each control
solenoid valve of inverted bone.
C. Set closed time of each control
solenoid valve of inverted bone.
D. Inverted bone ON/OFF.
E. Save and Exit.