Siruba ASC-TBH100A, Manual, Page: 48 / 65

16
Number Name Content
1 Title bar Display interface name, date and time.
2
Yield Count button Displays the output reset page, which can
clear the output count。
3 +1 button Yield Count plus 1.
4 -1 button Yield count minus 1.
5
Pattern Save
button Display pattern save page, can set pattern
name and pattern number.
6
Pattern Removal
button
Delete the currently displayed pattern.
7
Speed Increase
button
Increase speed by 100.
8
Speed reduction
button Speed reduced by 100.
9
Mode Settings
button Display Mode Settings page, you can set each
mode parameter.
10
Volume Edge
Width button Display the Digital input page, you can set the
width value.
11
Speed
compensation
button Display the Digital input page, you can set the
left and right wheel compensation value。
12
Start Stitch Count
button Display the Digital input page, you can set the
induction to the bone datum, the space to
send how many stitches the distance to start
the next stitch.
13
Bone Position
Height button Display input page, can set sensor to sense
the value of bone bit.
14
Number of bone
bits button Display the input page, you can set the
number of bone bits.
15 Stitch button Display input page to change stitch length.
16
End Stitch Count
button Display the input interface, you can set how
many stitches before the end of sewing after
the detection of bone position.
17 Page Up button The pattern number Rolls forward.
18
Pattern Number
button
Select and display the pattern parameter.
19 Page Down button The pattern number rolls backwards.