Siruba ASC-TBH100A, Manual, Page: 46 / 65

14
17.
The number of bone bits set test.
Set the number of bone bits in the main interface(P16,
the Reference Model change the parameter adjustment
5)
，
enter the sewing interface, put the cloth sewing,
observe whether the set of bone bits were detected
during sewing.
18.
Needle test before heavy line position.
Set the number of start needle in the main interface
（
P17, the Reference Model change the parameter
adjustment 6), enter the sewing interface, put the cloth
sewing, observe whether the position of the sensor has
changed when the weight line is relative to the starting
seam.
19.
Needle test after heavy line position.
Set the end needle number in the main interface
（
P17,
the Reference Model change the parameter adjustment
6), enter the sewing interface, put the cloth sewing,
observe whether the position of the sensor has changed
when the weight line is relative to the starting seam.
B. Touch screen Operation instructions
1.
Basic operations.
1) Turn on the power switch.
Sewing operation
Please connect the Power first.
Language selection screen first
display, select the language you
want to display, enter the main
control interface
。