Siruba ASC-TBH100A, Manual, Page: 44 / 65

12
s
l
interface, take the material and
Press pattern deletion button in the Setup
interface to enter the pattern delete interface. Select all
patterns to delete, Pres key to delete the
selected patterns.Delete all patterns at once by key
deleting al (P29, refer to delete the Pattern
interface introduction)
Note: The system is stored inside the template pattern
parameters, can not be deleted, modified to save into a new
pattern is avilable.
13.
Y-axis hem height position test.
Then go into the sewing
sew. After sewing, use a ruler to measure whether the
hem height is the same as the set value
。
14.
Measurement of the speed relation of needle
distance compensation
。
Set the value of the hem height at
the main interface by
the volume edge
width button. (cannot exceed
parameter range)