Sirona XIOS Plus Operating Instructions Manual Download

Page: 32 / 38

61 97 102 D3495

D3495

201.03.07

02 08.2011

7 Care of outer surface

Sirona Dental Systems GmbH

7.1 Care and cleaning agents

Operating Instructions XIOS

Plus

Sensors

Care of outer surface

7.1

Care and cleaning agents

CAUTION: Approved care and cleaning agents

Care and cleaning agents, with REF number

A continuously updated list of approved agents can be downloaded from

the Internet at the address

"www.sirona.com". In the navigation bar, go to

the menu items

"SERVICE" / "Care and cleaning" and then open the

document

"Care and cleaning agents".

If you do not have any access to the Internet, please contact your dental

depot to order the list.
REF 59 70 905

Care and cleaning agents, supplement for USA

The outside areas may be disinfected with a suitable chemical

disinfectant. Only use disinfectants that meet the requirements of the

national authorities and have been tested and certified for the necessary

bactericidal, fungicidal and virucidal properties.
Examples of approved disinfectants are:

● MinutenSpray classic, by ALPRO®
● MinutenWipes, by ALPRO®

In the USA and Canada:

● CaviCide® or
● CaviWipes ™ .

7.2

Disinfecting

Overview

The following components can only be disinfected by wiping them off:

● Size 1 and size 2 XIOS

Plus

X-ray sensors

NOTICE

Approved care and cleaning agents
Use only care and cleaning agents which have been approved by

Sirona!

NOTICE

Risk of sensor destruction
The sensor plug contains sensitive electronics.
No fluids may penetrate the sensor plug during preliminary cleaning and

wipe disinfection!

Summary of Contents for XIOS Plus







































Search results

Summary of Contents for XIOS Plus

Reviews:

Related manuals for XIOS Plus

Brands by name

Popular brands

Sirona XIOS Plus, Operating Instructions Manual

Search results

Summary of Contents for XIOS Plus

Reviews:

Related manuals for XIOS Plus

Brands by name

Popular brands