61 97 102 D3495
26
D3495
.
201.03.07
.
02 08.2011
5 Use of the X-ray Sensor
Sirona Dental Systems GmbH
5.4 Half-angle technique without radiation limiter
Operating Instructions XIOS
Plus
Sensors
2. Select the green universal sensor holder tab and remove the
protective foil from the adhesive surface.
3. Anterior tooth exposures: To take anterior tooth exposures, position
the sensor holder tab on the edge of the sensor near the cable.
4. Posterior tooth exposures: To take posterior tooth exposures,
position the sensor holder tab in the middle of the active area of the
sensor. The active area of the sensor is identified by dots on the
sensor.
X-ray image
1. Position the sensor in the patient's mouth.
2. Place the X-ray tube assembly in the correct position. Change the
position of the sensor holder if necessary.
3. Release an X-ray exposure.
4. Discard the universal sensor holder tab and the hygienic protective
sleeve following the patient examination.
