AREA OF USE AND SAFETY
Page 10 of 37
SICAT JMT
⁺
Jaw Motion Analysis System
PROHIBITED USE
■ Improper and/or prohibited use of the measurement system is not permitted and express warning is
herewith provided of such.
■ Do not under any circumstances attempt to maintain or prepare the measurement system in any way
other than as described in the operating instructions. This could cause the high sensitivity sensor
technology to be in impaired terms of its measurement accuracy.
■ In the case of malfunctions and/or defects being suspected and/or ascertained, the device has to be
taken out of use immediately, labelled as 'Out of Use', and secured to prevent use, with the on/off
switch being covered and secured with adhesive tape.
■ Changing or modifying the measurement system or its accessory parts without the written
permission of SICAT is not allowed. If the device is changed without permission, the operator is
obliged to carry out suitable examinations and inspections in order to guarantee the secure use.
■ SICAT measurement systems must not be operated in environmental conditions other than those
stated in the 'technical data' chapter (e.g. in an oxygen enriched environment, wet zones, damp
rooms, climactic chambers, low pressure-, high pressure-, or altitude chambers, etc.).
2.2.6
