11 Basic treatment center settings in the Mode dialog
Sirona Dental Systems GmbH
11.11 Mode: WHITE BALANCE (only with an integrated SIROCAM 3)
Operating Instructions C4
+
59 06 313 D 3382
60
D 3382.201.01.13.02
11.11
Mode: WHITE BALANCE (only with an integrated SIROCAM 3)
White balance for the SIROCAM 3
This Mode dialog is only displayed in connection with an
integrated SIROCAM 3.
The camera handpiece contains data making it possible
to restore the factory-set color definitions regardless of
the dental treatment center where the camera is used.
Thus the camera can be used at different dental treat-
ment centers.
For adjustments, e.g. if you wish to set individual colors,
you must perform a while balance.
Select the
“TAKE VCAM”
display in the Mode dialog.
When you pick up the camera, the dialog for performing
the white balance is displayed.
There are 3 options available:
The display shows the current camera status, i.e., if an
individual white balance was performed the last time,
USER
is displayed in bold type.
If the factory settings are valid,
HOME
is displayed in
bold type.
The selected item is flashing.
Select
USER
with the
– / +
keys.
USER
starts flashing.
Set the slide switch (2) of the camera to its middle posi-
tion (overview exposure).
Then hold the camera so that its lens is located 2–5 cm
above a color pattern sheet of your own choice (A) in the
live mode.
The screen must be
completely
filled by the focused
color area.
•
Press the
Mode
key to start the white balance (takes
several seconds).
If the white balance has been completed successfully,
USER
is displayed in bold type and an audible confirma-
tion signal sounds.
If the white balance has not been successful, USER will
not be displayed in bold type. You may repeat the white
balance as often as desired.
Different color patterns will produce different results with
respect to the color settings. For example, a color area
with a high amount of blue will reduce the amount of blue
color in the video image.
A
HOME – USER – EXIT
A
USER
- individual white balance
HOME
- factory settings (can be restored at any
time)
EXIT
- to exit the WHITE BALANCE dialog.
2
A
