Note: When an IP address changes, cameras using DHCP can always be identified by their
MAC address, found on the camera's label. You are advised to keep the MAC address on
record for future identification.
To acquire the IP address via DHCP
1
On the System tab, click Network in the menu on the left.
2
In the Network submenu, select Basic.
3
Select the option Get IP address automatically.
4
Click Save to confirm the new setting.
The camera restarts automatically.
5
6.3.1.2
Modify the fixed IP address
The factory default IP address is in the 10.x.x.x range.
To modify the camera's fixed IP address
1
On the System tab, click Network in the menu on the left.
2
In the Network submenu, select Basic.
3
Select Use fixed IP address.
4
In the IP address box, type the camera's IP address.
5
Enter the subnet mask, default gateway, and DNS server IP addresses in the appropriate
boxes.
See below for more detailed information.
6
Click Save to confirm the new settings.
7
Enter the new IP address in the address bar of your web browser, and then press Enter
to re-establish communication with the camera.
- or -
Find the camera with
Siqura Device Manager
.
IP address
The IP address identifies the camera on the network.
Subnet mask
The subnet mask is used to determine if the destination is on the same subnet. The default
value is 255.0.0.0.
Default gateway
The default gateway is used to forward frames to destinations on other subnets. If the
gateway setting is invalid, transmissions to destinations on other subnets will fail.
DNS
The primary DNS is the primary domain name server that translates host names into IP
addresses. The secondary DNS is a second domain name server that is used if the primary
DNS is unavailable.
System settings
34