4.6
Install Siqura Viewer
The first time you access the webpages of the camera, you may be prompted about the
installation of Siqura Viewer. This add-on is required to view camera images in the webpages.
The Siqura Viewer installation file is named
install.cab
. It does not give rise to any security
risks. You can install it safely.
Important: You are strongly advised to remove a previous installation of Siqura Viewer
from your computer before you initially access the camera over the network or when you
encounter an "A new version is available" message. For more information, see Appendix:
Delete the existing Siqura Viewer software.
Note: Make sure that the security settings of your web browser permit the use of ActiveX
controls. For more information on how to modify these settings, see Appendix: Set up
Internet Security.
To install the Siqura Viewer software
1
When prompted about the ActiveX control installation, allow the Siqura Viewer
installation wizard to make changes to your computer.
2
In the initial screen of the installation wizard, click Next.
A progress bar is displayed while the application is being installed.
3
When installation is complete, click Finish.
The camera’s web interface is displayed.
Siqura Viewer installation wizard
4.7
The HSD820 web interface
On successful login, the home page of the HSD820 is displayed. Camera settings and
functions are organised on five tabs found across the top of this page: Home, System,
Streaming, PTZ&IMAGE, and Logout.
Access the webpages
18