Sionyx OPSIN DNVM1 User Manual Download Page 26 | Manualshive

Page: 26 / 61

background image

24

S I O N Y X O P S I N U S E R M A N U A L

5. To use the micro-SD to capture images and videos it needs to be

formatted in OPSIN. NOTE: A micro-SD card that has been previously

formatted on another device will need to be re-formatted on OPSIN.

A. If a card is not formatted, the micro-SD card icon will appear on the

display with no number.

B. If a card has been formatted, the micro-SD card icon will appear on

the display with a number next to it. The number indicates the number

of files saved on the card.

USING OPSIN

6. To format the SD card, bring up the main menu by pressing and holding

the center button.

7. Navigate to SD card and press the center button to bring up the SD card

menu.

8. Navigate to format and press the center button.

9. OPSIN will format the micro-SD card for use on the device. During

formatting a red micro-SD card icon will appear on the display.

«
...
24
25
26
27
28
...
»

Summary of Contents for OPSIN DNVM1






























































Reviews:

No comments

Related manuals for OPSIN DNVM1

Brand: HIKE CREW Pages: 2

Brand: Zhumell Pages: 16

Brand: Riton Pages: 8

Brand: Sharper Image Pages: 3

Brand: Sharper Image Pages: 7

Brand: FULL MOON OPTICS Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands