F.
SAFETY DURING REPAIR AND MAINTENANCE
WARNING!
•
Only skilled persons should carry out repairs and maintenance.
•
Read the operator’s and maintenance manual carefully before using the PHS or doing any
maintenance jobs.
•
During cleaning operations, maintenance jobs, or when changing parts, the Power switch must
be off and the machine must be unplugged by removing the Power cable from the socket.
•
During maintenance jobs, affix a notice to the appliance indicating „MACHINE BEING SERVICED,
DO NOT START”.
•
Never disassemble, modify or repair the power supply, plug, or devices inside the PHS unit
except as described in the product manual.
•
Do not adjust controls that are not described in the manual.
WARNING!
•
Structural damage and improper alterations or repairs could change the protection capacity of
the PHS and therefore cancel the guarantee.
•
Any alterations to the appliance can only be made by Sinterit Support.
•
Use only with the equipment recommended by the producer. In the event of Customers fitting
a tool to the machine not supplied by Sinterit, make sure the safety conditions required by
Machine Directive 2006/42/CE are complied with and in any event, Sinterit is unable to accept
liability for any problems arising from the use of such tool.
•
Use only original spare parts.
STOP!
•
Avoid using flammable or toxic solvents such as petrol, benzene, ether, and alcohol for cleaning.
•
Do not immerse the device in water for cleaning purposes or use a pressurized water jet to
clean it.
G.
WORKING WITH POWDERS
WARNING!
•
When working with the polyamide powder or other designated printer powder
for the Sinterit Lisa PRO printer, always wear Personal Protection dedicated
to this device (Protective Glasses, Protective Gloves, Protective Dust Mask).
•
When working with a polyamide/rubber powder, avoid inhalation or swallowing
and contact with skin and eyes.
WARNING!
First aid when working with PA/FLEXA powder:
•
If the PA/FLEXA powder is inhaled, move to a place with fresh air and gargle thoroughly with
plenty of water. If coughing develops, contact a physician.
•
If you eat a PA/FLEXA powder, rinse your mouth with water and drink 1-3 glasses of water to
dilute stomach contents. If necessary, contact your doctor.
•
If the PA/FLEXA powder gets in your eyes, rinse them thoroughly with water. In case of
persisting eye irritation, contact a physician.
•
When the PA/FLEXA powder gets in contact with your skin, wash it with soap and water.
9 | POWDER HANDLING STATION Manual
Summary of Contents for POWDER HANDLING STATION
Page 2: ......