26
•
Enable/Disable
•
Control Change (CC) -
Settings for the CC commands the BeatBuddy follows. CC
commands can be numbered CC 0-127,
each
with a Value 0-127.
o
Enable
*
/Disable
- Toggle receiving all CC commands on/off
o
Tempo (CC:80, CC:81, value 1-127) -
When enabled, you can control the
BeatBuddy’s tempo using CC:80 to increase the tempo and CC:81 to
decrease the tempo. Example: When the BeatBuddy receives CC:80, Value
10 it changes the tempo to current tempo + 10 BPM. CC:81 decreases the
tempo by the Value amount.
•
Enable
*
/Disable
o
Half Time (CC:82, value 1-127) -
The BeatBuddy enters Half Time mode
at
the next
me
asure. CC:82, value 0 goes back to Normal Time at the end
of
the measure.
•
Enable
*
/Disable
o
Double Time (CC:83, value 1-127)
- The BeatBuddy enters Double Time
mode at the next measure. CC:83, value 0 goes back to Normal Time at
the
end of the measure.
•
Enable
*
/Disable
o
Mix-Vol (CC:108, value 0-100)
- When enabled, the Mixer volume (main
volume knob that controls only the drum sound volume) can be
controlled
by sending the MIDI message with a value ranging from 0 to
100.
If
disabled, the BeatBuddy ignores all mixer volume commands it
receives.
This parameter can be set to work with INC/DEC commands, read how in
Tempo Control.
•
Enable
*
/Disable
o
HP-Vol (CC:109, value 0-100)
- When enabled, Headphone volume can be
controlled by sending the MIDI message with a value ranging from 0 to
If disabled, the BeatBuddy ignores all headphone volume commands it
receives.
This parameter can be set to work with INC/DEC commands, read
how in Tempo Control
•
Enable
*
/Disable
o
Accent-Hit (CC:110, any value)
- When enabled, the BeatBuddy will play
the current song part accent hit each time it receives the Accent-Hit MIDI
message. You can control the volume of the accent hit by changing the
value of the message ranging from 0 to 127. If disabled the BeatBuddy
ignores all Accent-Hit commands it receives.
•
Enable
*
/Disable
BeatBuddy Manual
MIDI and the BeatBuddy
