1. Select the pattern 43 from the Group 2-B
Patterns to get the button sewing stitch.
Change the presser foot to the button sewing
foot "RC" and lower feed dogs.
2.5~4.5
BUTTON SEWING
2. Position the fabric under the foot. Place the
button in the desired position, lower the presser
foot lever.
3. Adjust the stitch width to "2.5-4.5" according to
the distance between the two holes of the button.
6
2
2.5~4.5
3
4
4. Turn the handwheel counterclockwise to check
that the needle goes cleanly into the left and
right holes of the button.
With scissors, cut the upper and bobbin threads
at the beginning of the stitching, pull the upper
thread at the end of the stitching to the wrong
side of the fabric, and then tie it with the bobbin
thread.
6. For 4-hole buttons, sew the two holes towards
the front. Then, raise the presser foot, move
the fabric so that the needle goes into the back
two holes, and then sew them in the same way.
5
RC
57
Note:
Repeat this procedure to attach the
button more securely.
Note:
Sew at a slow speed to avoid hitting
the button.
5. Hold the end of the upper thread gently, and
begin sewing. Once sewing is completed, the
machine automatically sews reinforcement
stitches, then stops.
Note:
If a shank is required, place a needle
or straight pin on top of the button and sew.
STITCHES
Note:
The auto thread cutter is not to be
used for button sewing.
1
