24
GETTING READY
WINDING THE BOBBIN
Attention:
Since this machine is equipped
with an independent bobbin winder the sewing
speed controller does not effect the winding
speed. Keep fingers clear of the needle area
while winding the bobbin.
8. Press the bobbin winding button.
10.After the bobbin has wound a few turns stop
the machine and cut the thread near the hole
of the bobbin. Continue winding the bobbin
until it is full.
The bobbin stops spinning automatically when
it is full, and the bobbin winder switch returns
to the orginal position.
Note:
When the bobbin winder button is
pushed without pushing the bobbin winder
switch to the left, the following screen is
displayed for a few seconds.
9. When the bobbin winder switch is pushed to
the left and bobbin winder button is pressed,
the LCD screen will display the animation of
the bobbin winding.
11
8
9
10
11.Remove the bobbin then cut the thread on
the thread cutter.
