30
Singer Furtura III series
Test mode of sewing machine
Apply to model CE-200E, CE-250/350
In order to check or set the step motor or sensor functions of the machine there is a Test mode.
Handling
Go to the Test mode of the machine by...
1. Move bobbin winder shaft to the right (A) for
bobbin winding.
See illustration
2. Press the reverse stitch switch (B) located at
the center position. See illustration
3. Turn on power switch (C) . See illustration below
4. Move bobbin winder shaft to the left (D) within 5 seconds
to release it from bobbin winding position.
5. Release the reverse button and now should button Nr 1 blink.
In case of embroidery sewing, enter the Embriodery unit before enter the test menu.
C
①
②
③
④
⑤
⑥
2
S
4
(A)
(B)
(D)
