User Manual
EM303A General Purpose Inverter
94
selection.
Xi=24
Switch input control mode to speed control mode
When the terminal is on, the present input control mode is switched to the speed
control mode, and its function is equivalent to F0-03=0. After it is off, it returns
the previous input control mode automatically.
Xi=25
Switch input control mode to torque control mode
When the terminal is on, the present control mode is switched to torque control
mode. Its function is equivalent to F0-03=1. After it is off, it returns the previous
input control mode automatically.
When the corresponding function terminals of Xi=24/25 are on
simultaneously, terminal of Xi=24 is prior to terminal of Xi=25. If it is not set
as SVC1, F0-02
≠
3
，
it cannot be switched to torque control.
Xi=26
Not Used
Xi=27
Switch speed input setting mode to primary speed setting mode
In speed control mode, if the terminal is on, and then integrated speed input mode
is switched to primary speed setting mode. After it is off, it returns the previous
input mode automatically. It is equivalent to setting the ones place of F9-03=0
when it is on.
Xi=28
Switch speed input setting mode to auxiliary speed setting mode
In speed control mode, if the terminal is on, then the speed input setting mode is
switched to auxiliary speed setting mode. Its function is equivalent to setting the
ones place of F9-03 =1. After the terminal is off, it returns the previous setting
mode automatically.
Xi=29
Switch primary speed setting mode to regular speed setting mode
In speed control mode, if the terminal is on, then the primary speed setting mode
is switched to regular speed setting mode. Its function is equivalent to F0-26=0.
After the terminal is off, it returns the previous setting mode automatically.
Xi=30
Switch regular speed input setting mode to numeric speed input setting mode
In regular speed control mode, if the terminal is on, then the present regular speed
setting mode of F0-06 is switched to the numeric speed input setting mode. Its
function is equivalent to F0-06=0. After the terminal is off, it returns the previous
setting mode automatically.
Xi=31
Switch jog input setting mode to jog numeric speed input setting mode
In regular speed control mode, if the terminal is on, then the present jog speed
setting mode is switched to jog numeric speed input setting mode. Its function is
equivalent to setting the tens place of F9-03=0. After the terminal is off, it returns
the previous setting mode automatically.
Xi=32
Switch torque input to primary torque setting
In torque control mode, if the function terminal is on, then the resultant torque
input mode is switched to the primary torque setting active. After the terminal is
off, return the previous setting mode automatically.
Xi=33
Switch torque input to auxiliary torque setting
