Sindoh A610 Series, Service Manual

Page: 63 / 218

59
Output Unit Components
The output unit consists of the following 15 components. Role of each component is as
follows.
1) Output Frame: Other parts of the output unit are assembled and act as a guide for the
print side of paper
2) Large Output Gear: Delivers power from the fusing gear to no.3 small gear.
3) Small Output Gear: Delivers last rotating power to the output shaft.
4) Forward/Reverse Bracket: Controls output shaft rotation by moving to solenoid
5) Bracket Spring: Positions no.4 bracket to allow the output shaft to rotate forward
when solenoid is not operating.
6) Gear Bracket: Fixes positions of large and small output gears and the forward/reverse
bracket
7) Screw
8) Output Shaft: 4 rollers inserted in sum shaft (assembled) that are connected to the
gear and rotate with the idle roller assembled in the upper cover to give paper
locomotive power
9) Busing: Reduces friction in the rotation unit of the output shaft
10) Shaft Gear: Delivers rotating power from the small output gear to the output shaft
11) Sintered Bushing: Connects the earth plate to the output shaft to remove static
electricity from the conductive output shaft.
12) E Ring: Holds the output shaft to prevent it from shaking sideways
13) Earth plate: Removes the static electricity in the output shaft to the ground.
14) Output Frame Idle Roller: Transfers short paper
15) Idle Output Spring: Applies pressure to the idle roller in the output frame